Vivo Y83 PD1803F Stock Firmware ROM (Flash File) Care File Free

admin shohag avatar   
admin shohag
Download the official Vivo Y83 PD1803F Stock Firmware ROM (Flash File) for your Vivo Mobile. We also provide all other Vivo Stock Firmware for free.

You can easily get the official Vivo Y83 PD1803F Firmware ROM Flash File on this page. The Firmware will be in a zip package, and you will get the USB driver, flash file, and how to manually install the ROM on the mobile.

Vivo Y83 PD1803F Firmware ROM (Flash File)

If you are looking for Vivo Y83 Tested Firmware, this page is the right place for you; we provide the download link of the file directly in the post so that it can be downloaded very easily with one click. So without delay, download Vivo Y83 Update Firmware now. Before downloading, ensure your device model is Vivo Y83, if not, then flashing the stock firmware below may brick your mobile.


Vivo Y83 PD1803F Firmware update helps to protect your mobile from malicious software by updating it to the latest version and also helps to restore the bricked device and fix the boot loop, hang logo, and dead after flash issues.


Install Vivo Y83 latest Firmware to restore your mobile to the new version. This vivo firmware helps to upgrade and downgrade the stock ROM of your vivo smartphone.

File Name:

File Size: 2GB

 Google Drive l Link2

File Name:

File Size: 3GB

 Google Drive l Link2


  • The Stock ROM will work with the Vivo Y83.
  • A computer or laptop with a USB port.
  • A USB cable is used to connect the phone to the computer.
  • Make sure that the battery on the phone has at least 50% charge.
  • A firmware flashing tool, such as SP Flash Tool.


  • Download and extract Vivo Y83 Stock Firmware to your computer.
  • Download and install the Vivo USB drivers on your computer. (Get a USB Driver)
  • Back up all data on your Vivo Y83, as flashing a new ROM will delete data from the device.
  • Open the flash tool and load the Stock ROM you downloaded onto your PC.
  • Connect your Vivo Y83 mobile to your computer using a fast-charging USB cable.
  • To start the flashing Process, click the “Start” button on the flash tool.
  • Wait for the Process to complete, and then unplug your Vivo Y83 from the computer.
  • Power on your device, and the flashing process is complete.
[*] Disclaimer: Updating firmware is a complex process and should only be done with sufficient knowledge. Neither I nor anyone else will be responsible for any damage to your device.


[*] Take a Backup: If you are flashing an old firmware on your Vivo Y83 device, make sure to take a backup of your data as the stock firmware flash will erase it.

No comments found